Datasheet4U Logo Datasheet4U.com

ULV377 - SINGLE CMOS OPERATIONAL AMPLIFIERS

General Description

The UTC ULV377 family of operational amplifiers are wide-bandwidth CMOS amplifiers that provide very low noise, low input bias current, and low offset voltage while operating on a low quiescent current of 680μA(typ).

Key Features

  • Supply Voltage: 2.2 ~ 5.5V.
  • Supply Current/Amplifier: 1.05mA (Max. ).
  • Input Offset Voltage: 1mV (Max. ).
  • Rail-to-Rail Input and Output.
  • Slew Rate: 3.1V/µs (Typ. ).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ULV1546 20V HIGH CURRENT DRIVE RAIL-TO-RAIL VCOM/GAMMA BUFFER Unisonic Technologies

Other Datasheets by Unisonic Technologies

Part Number Description
ULV333 RAIL-TO-RAIL INPUT/OUTPUT CMOS SINGLE OPERATIONAL AMPLIFIERS
ULV1012 PRE-AMPLIFIED
ULV2333 RAIL-TO-RAIL INPUT/OUTPUT CMOS DUAL OPERATIONAL AMPLIFIERS
ULV2362 HIGH-PERFORMANCE LOW-VOLTAGE OPERATIONAL AMPLIFIERS
ULV2702 NANOPOWER OPERATIONAL AMPLIFIERS AND PUSH-PULL COMPARATORS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD ULV377 SINGLE CMOS OPERATIONAL AMPLIFIERS CMOS IC  DESCRIPTION The UTC ULV377 family of operational amplifiers are wide-bandwidth CMOS amplifiers that provide very low noise, low input bias current, and low offset voltage while operating on a low quiescent current of 680μA(typ). In addition, this device has a reasonably wide supply range with excellent PSRR, making it attractive for applications that run directly from batteries without regulation.  FEATURES * Supply Voltage: 2.2 ~ 5.5V * Supply Current/Amplifier: 1.05mA (Max.) * Input Offset Voltage: 1mV (Max.) * Rail-to-Rail Input and Output * Slew Rate: 3.1V/µs (Typ.