Datasheet4U Logo Datasheet4U.com

UC3863 - LOW COST POWER-SAVING MODE PWM CONTROLLER

Description

The UC3863 is a high performance current mode PWM controller ideally suited for low standby power.

The PWM switching frequency is programmable externally at normal operation.

Features

  • S.
  • UTC proprietary frequency hopping technology for Improved EMI performance.
  • Power-saving mode for high light-load and standby efficiency.
  • Dynamic peak current limiting for constant output power.
  • Built-in synchronized slope compensation.
  • OTP,OLP,OVP and VDD clamp for higher security.
  • Programmable PWM Frequency.
  • Gate output voltage clamped at 15V.
  • Low start-up current.
  • Cycle-by-cycle Current Limiting.
  • Under voltage lockout (UVLO).
  • Few ext.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UC3863 Resonant-Mode Power Supply Controllers Unitrode
UC3861 Resonant-Mode Power Supply Controllers Unitrode
UC3862 Resonant-Mode Power Supply Controllers Unitrode
UC3864 (UC3861 - 3868) Resonant-Mode Power Supply Controllers Unitrode
UC3865 Resonant-Mode Power Supply Controllers Unitrode

Other Datasheets by Unisonic Technologies

Part Number Description
UC3863A LOW COST POWER-SAVING MODE PWM CONTROLLER
UC3869 HIGH VOLTAGE GREEN MODE PWM CONTROLLER
UC3869A HIGH VOLTAGE GREEN MODE PWM CONTROLLER
UC3869H HIGH VOLTAGE GREEN MODE PWM CONTROLLER
UC3816A LOW COST POWER-SAVING MODE PWM CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UC3863 LINEAR INTEGRATED CIRCUIT LOW COST POWER-SAVING MODE PWM CONTROLLER FOR FLYBACK CONVERTERS „ DESCRIPTION The UC3863 is a high performance current mode PWM controller ideally suited for low standby power. The PWM switching frequency is programmable externally at normal operation. Low VDD startup current make the power reliable on startup design and a large value resistor could be used in the startup circuit to minimize the standby power. At no load condition, the IC operates in power-saving mode for lower standby power, decreasing frequency for Higher conversion efficiency at light load condition.
Published: |