Datasheet4U Logo Datasheet4U.com

U74LVC1G374 - SINGLE D-TYPE FLIP-FLOP

General Description

The U74LVC1G374 device is single D-type latch is designed for 1.65V to 5.5V VCC operation.

Key Features

  • S.
  • Wide supply voltage range from 1.65V to 5.5V.
  • Inputs accept voltages up to 5.5V.
  • IOFF supports partial-power-down mode.
  • Low static power consumption; ICC=10μA (Max. ).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
U74LVC1G32 SINGLE 2-INPUT POSITIVE-OR GATE Unisonic Technologies
U74LVC1G34 SINGLE BUFFER GATE Unisonic Technologies
U74LVC1G00 SINGLE 2-INPUT NAND GATE Unisonic Technologies
U74LVC1G02 SINGLE 2-INPUT NOR GATE Unisonic Technologies
U74LVC1G04 SINGLE INVERTER GATE Unisonic Technologies

Other Datasheets by Unisonic Technologies

Part Number Description
U74LVC1G373 SINGLE D-TYPE LATCH
U74LVC1G3157 DOUBLE-THROW ANALOG SWITCH
U74LVC1G3157A DOUBLE-THROW ANALOG SWITCH
U74LVC1G3208 SINGLE 3-INPUT POSITIVE-OR-AND GATE
U74LVC1G332 SINGLE 3-INPUT POSITIVE-OR GATE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD U74LVC1G374 Preliminary SINGLE D-TYPE FLIP-FLOP WITH 3-STATE OUTPUT  DESCRIPTION The U74LVC1G374 device is single D-type latch is designed for 1.65V to 5.5V VCC operation. The U74LVC1G374 features a 3-state output designed specifically for driving highly capacitive or preventing damaging current backflow relatively low-impedance loads. This device is particularly suitable for implementing buffer registers, input/output (I/O) ports, bidirectional bus drivers, and working registers. On the positive transition of the clock (CLK) input, the Q output is set to the logic level set up at the data (D) input.