Datasheet4U Logo Datasheet4U.com

U74HCT564 - OCTAL D-TYPE FLIP-FLOP

Description

The U74HCT564 is octal D-type flip-flops featuring separate D-type inputs for each flip-flop and inverting 3-state outputs for bus oriented applications.

A clock (CP) and an output enable ( OE ) input are common to all flip-flops.

Features

  • S.
  • 3-state inverting outputs for bus oriented.

📥 Download Datasheet

📁 Similar Datasheet

  • U74HCT563 - OCTAL TRANSPARENT D-TYPE LATCHES (Unisonic Technologies)
  • U74HCT541 - OCTAL BUFFERS AND LINE DRIVERS (Unisonic Technologies)
  • U74HCT573 - OCTAL TRANSPARENT D-TYPE LATCHES (Unisonic Technologies)
  • U74HCT574 - OCTAL D-TYPE EDGE-TRIGGER FLIP-FLOP (Unisonic Technologies)
  • U74HCT595 - 8-BIT SHIFT REGISTERS (Unisonic Technologies)
  • U74HCT00 - QUADRUPLE 2-INPUT NAND GATE (Unisonic Technologies)
  • U74HCT08 - QUADRUPLE 2-INPUT AND GATE (Unisonic Technologies)
  • U74HCT125 - QUADRUPLE BUS BUFFER GATES (Unisonic Technologies)
  • U74HCT138 - 3-TO-8 LINE DECODERS / DEMULTIPLEXERS (Unisonic Technologies)
  • U74HCT165 - 8-BIT PARALLEL-LOAD SHIFT REGISTER (Unisonic Technologies)
Other Datasheets by UTC
  • U74HCT14 - HIGH-SPEED CMOS LOGIC HEX INVERTING SCHMITT TRIGGER
  • U74HCT367 - HEX BUFFERS AND LINE DRIVERS
  • U74HCT3G14 - TRIPLE INVERTER SCHMITT-TRIGGER
  • U74HC00 - QUADRUPLE 2-INPUT POSITIVE-NAND GATES
  • U74HC123 - DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR
  • U74HC138 - 3-TO-8 LINE DECODERS / DEMULTIPLEXERS
  • U74HC14 - HIGH-SPEED CMOS LOGIC HEX INVERTING SCHMITT TRIGGER
  • U74HC148 - 8-LINE TO 3-LINE PRIORITY ENCODERS

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD U74HCT564 Preliminary OCTAL D-TYPE FLIP-FLOP; POSITIVE-EDGE TRIGGER; 3-STATE; INVERTING  DESCRIPTION The U74HCT564 is octal D-type flip-flops featuring separate D-type inputs for each flip-flop and inverting 3-state outputs for bus oriented applications. A clock (CP) and an output enable ( OE ) input are common to all flip-flops. The 8 flip-flops will store the state of their individual D-inputs that meet the set-up and hold times requirements on the LOW-to-HIGH CP transition. When OE is LOW, the contents of the 8 flip-flops are available at the outputs. When OE is HIGH, the outputs go to the high impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops.
Published: |