FR3A THRU FR3M
3A Surface Mount Fast Recovery Rectifier
UPM
Voltage Range 50 to 1000Volts
Current 3.0 Amperes
Features
DO-214AB(SMC)
* Low profile package
* Plastic package has under writers laboratory 94V-0
* Ideal for surface mounted application
* Glass passivated chip juncyion
* Bulit-in strain relief design
* Fast switching for high efficient
* High temperture soldering : 250oC/10 seconds at terminals
Mechanical Data
.083(2.11)
.075(1.91)
.185(4.70)
.160(4.06)
* Case: molded plas body
* Terminal: Solder plated
* Polarity:Indicated by cathode band
* Packing: 0.21mm grams
.096(2.44)
.083(2.13)
.155(3.94)
.130(3.30)
.012(0.31)
.006(0.15)
.050(1.27)
.030(0.76)
.008
(.203)
MAX.
.220(5.59)
.200(5.08)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25oC ambient temperature unless otherwise specified.Single phase, half wave, 60 Hz, resistive or inductive
load.For capacitive load, derate current by 20%.
Type Number
FR3A FR3B FR3D FR3G FR3J FR3K FR3M Units
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward
Rectified Current at TL=90oC
Peak Forward Surge Current 8.3 ms single
half sine-wave supe iimposed on rated load
Maximum Forward Voltage at Io=2.0A
Maximum Reverse Current at 25oC
Maximum Reverse Current at 125oC
Maximum Reverse Recovery Time(Note1)
Tyical Junction Capacitance (Note2)
Tyical Themal Resistance (Note3)
Operating and Storage Temperature Range
50 100 200 400 600
35 70 140 280 420
50 100 200 400 600
3.0
100
1.30
10.0
350.0
150 250
60.0
15
50
-55 to+150
NOTES:
1.Reverse Recovery Test Conditions: IF = 0.5A, IR=1.0A, Irr=0.25A
2.Measured at 1.0MHz and appliedreverse voltage of4.0 volts.
3.8.0mm(.013mm thick) landareas.
800 1000 Volts
560 700 Volts
800 1000 Volts
Amps
Amps
Volts
uS
500 nS
pF
oC/W
oC
Http://www.upm.com.tw
E -mail:upm.tw@msa.hinet.net