1.5SMCJ45CA Datasheet | UPM

UPM 1.5SMCJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Voltage Range 5.0-220 Volts Power 1500 Watts Features - For surface mounted applications in order to optimize board space. - Low profile package - Built-in strain relief - Glass passivated junction - Low inductance - Plastic package has Underwriters Laboratory Flammability Classification 94V-O - High temperature soldering : 260¢XC /10 seconds at terminals - Pb free product are available : 99% Sn above can meet Rohs environment substance directive request DO-41 Mechanical Data Case: JEDEC DO-214AB,Molded plastic over passivated junction. Terminals: Solder plated,solderable per MIL-STD-202G, Method 208 Polarity: Color band denotes positive end (cathode) Standard Packaging:16mm tape (EIA-481) Weight: 0.007 ounce, 0.021 gram Devices For Bipolar Applications For Bidirectional use C or CA Suffix for types 1.5SMCJ5.0 thru types 1.5SMCJ220. Electrical characteristics apply in both directions. Maximum Ratings and Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.Resistive or inductive load, 60Hz. For Capacitive load derate current by 20% Rating Peak Power Dissipation at T A=25 OC, TP 1ms(Note 1,2 ,Fig.1 ) Peak Forward Surge Current,8.3ms single half sine-wave superimposed on rated load (Note 2,3) Peak Pulse Current Current on 10/1000s waveform(Note 1,Fig.3 ) Operating Junction and StorageTemperature Range Symbol PPM IFSM IP P M TJ,TS TG Value 500 100 See Table 1 -55 to +150 Units Watts Amps Amps...