PA2010
PA2010/SMPA2010
200 TO 2000 MHz TO-8 CASCADABLE AMPLIFIER
- HIGH POWER OUTPUT: +25.5 d Bm (TYP.)
- HIGH THIRD ORDER IP3: +33 d Bm (TYP.)
- MODERATE NOISE FIGURE: 5.0 d B (TYP.)
- LOW VSWR: 1.5:1 (TYP.)
Specifications (Rev. Date: 2/02)-
Characteristics Frequency Small Signal Gain (min.) Gain Flatness (max.) Reverse Isolation Noise Figure (max.) Power Output @ 1 d B p. (min.) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max.) DC Current @ 15 Volts (max.) Typical
0° to 50°C
Typical Performance @ 25°C
Guaranteed
-54° to +85°C
0.2-2.4 GHz 10.0 d B ±0.3 d B 20 d B 5.0 d B 25.5 d Bm +33 d Bm +50 d Bm +55 d Bm 1.8:1 / 1.5:1 179 m A
0.2-2.0 GHz 9.0 d B ±0.7 d B
6.5 d B 23.5 d Bm
0.2-2.0 GHz 8.5 d B ±1.0 d B 7.0 d B 23.0 d Bm
1.9:1 / 1.7:1 187 m A
2.0:1 / 1.8:1 189 m A
- CPA2010 is a standard PA2010 installed in an SMA connectorized housing and is guaranteed over 0°C to 50°C with the PA2010's specifications limits of -54°C to+85°C. Measured in a 50-ohm system at +15 Vdc Nominal. Subject to change...
