PCF-112D2M Datasheet | Tyco Electronics

Features - Meet UL 508, CSA, TUV requirements. - 1 Form A contact arrangements. - Quick connect terminal type and PC board type. - Meet 5,000V dielectric voltage between coil and contacts. - Meet 10,000V surge voltage between coil and contacts (1.2 / 50µs). Coil Data @ 20°C PCF / PCFN Rated Coil Voltage (VDC) 06 09 12 24 Nominal Current (m A) 150.0 100.0 75.0 37.5 Coil Resistance (ohms) ± 10% 40 90 160 640 Must Operate Voltage (VDC) 4.50 6.75 9.00 18.00 Must Release Voltage (VDC) 0.30 0.45 0.60 1.20 Contact Data @ 20°C Arrangements: 1 Form A. Material: Ag Sn O Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100m A @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Operate Data Contact Ratings Ratings: 25A @ 250VAC resistive. 23A @ 277VAC resistive. 20A @ 250VAC inductive (cosø= 0.4). Max. Switched Voltage: AC: 250V. Max. Switched Current: 25A. Max. Switched Power: 6,370VA. Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: 20 ms max. Release Time: 10 ms max. Environmental Data Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 8,000V (1.2 / 50µs). Temperature Range: Operating: -30°C to +55°C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Coil Data Voltage: 6 to 24VDC. Nominal Power: 900 m W. Coil Temperature Rise: 55°C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle:...