TGS2355-SM Datasheet | TriQuint Semiconductor

Features - - - - - - - - - Frequency Range: 0.5 - 6 GHz Insertion Loss: < 1.1 d B Power Handling: ≤ 50 d Bm (pulsed) Isolation: 40 d B typical Return Loss: > 15 d B Control Voltages: 0 V/-40 V Switching Speed: < 50 ns Reflective Switch Package Dimensions: 5.0 x 5.0 x 1.42 mm Functional Block Diagram General Description The Tri Quint TGS2355-SM is a Single-Pole, Double Throw (SPDT) reflective switch fabricated on Tri Quint's TQGa N25 0.25um Ga N on Si C production process. Operating from 0.5 to 6GHz, the TGS2355-SM typically supports up to 100W input power (pulsed) handling at control voltages of 0/-40 V. This switch maintains low insertion loss of 1.1 d B or less and greater than 40 d B isolation, making it ideal for high power switching applications across both defense and mercial platforms. The TGS2355-SM is offered in a 5 x 5 mm air-cavity QFN package prised of an aluminum-nitride base with a LCP epoxy-sealed lid. This, along with the minimal DC power consumption, allows for easy system integration. Lead-free and Ro HS pliant. Evaluation boards available on request. Pin Configuration Pin No. 28, 29 22 3 5 20 1-2, 4, 6-19, 21, 23-27, 30-32, 33 Label RFC VC1 VC2 RF2 RF1 GND Ordering Information Part No. ECCN EAR99 Description 0.5-6 GHz 100 Watt Ga N Switch Datasheet: Rev - 07-18-14 © 2014 Tri Quint - 1 of 13 - Disclaimer: Subject to change without notice .triquint. 0.5-6 GHz 100 Watt Ga N Switch Absolute Maximum Ratings Parameter Control Voltage (VC) Control Current (IC) Power Dissipation RF Input Power (pulsed, 10% Duty Cycle, 20us pulse width) Channel Temperature, TCH Mounting Temperature (30 sec) Storage Temperature Remended Operating Conditions Rating Parameter Frequency Input Power Handling (pulsed) Control Voltage Channel Temp., Tch Min Typ ≤ 50 -40 ≤ 225 Max Units 6 GHz d Bm V ° C -50 V -3.5 / +3.5 m A 35 W 50.5 d Bm 275 ° C 320 ° C -55 to 150 ° C Electrical specifications are measured at specified test conditions. Specifications...