TLRA1002 Datasheet | Toshiba

TOSHIBA LED SMD Lamp LED Surface Mount Device Features - 2.0(L) x 1.25(W) x 1.1(H) mm Size - Small Package - High Density Mounting is Available - Available for Automounting Machine Use - Reflow Soldering is Applicable - Low Drive Current, High Intensity Light Emission - Remended Forward Current: IF = 10 m A (DC) - Fast Response Time - Capable of Pulse Operation - High Power Luminous Intensity - Applications: - Telephone Cordless/Cellular - Portable Instrument - Backlight, etc. Line-Up Product Name TLPG1002 TLG1002 TLGD1002 TLYE1002 TLOE1002 TLS1002 TLRA1002 Color Pure Green Green Green Yellow Orange Red Red Material Ga P Ga P Ga P In Ga Al P In Ga Al P Ga As P Ga Al As TLG1002, TLGD1002, TLPG1002, TLOE1002, TLYE1002, TLS1002, TLRA1002 Unit in mm The information contained here is subject to change without notice. The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic equipments (office equipment, munication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, bustion control, all types of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA. TOSHIBA CORPORATION 1/11 TLG1002, TLGD1002, TLPG1002, TLOE1002, TLYE1002, TLS1002,...