TC7WPB306FC Overview
These devices have two separate power supplies, VL for a 1.8-V, 2.5-V or 3.3-V bus and VH for a 2.5-V, 3.3-V or 5.0-V bus. For bidirectional level-shifting, the VH pin is connected to a high-voltage power supply through a bias resistor, and pull-up resistors are connected between the high-voltage power supply and the switch. The enable signal can be used to disable the device so that the buses are effectively...
TC7WPB306FC Key Features
- Operating voltage: VL = 1.65 to 5.0 V, VH = VL + 0.5 to 5.5 V
- High-speed operation: tpd = 0.12ns(max)
- Low ON-resistance: RON = 3.0 Ω (typ.)
- ESD performance: Machine model ≥ ±200 V
- 5.5-V tolerance and power-down protection at the Output Enable input
- Packages: CSON8 (CST8), SSOP8 (US8)