Datasheet4U Logo Datasheet4U.com

TC74HC574AF - Octal D-Type Filp-Flop

Key Features

  • High speed: fmax = 62 MHz (typ. ) at VCC = 5 V.
  • Low power dissipation: ICC = 4 μA (max) at Ta = 25°C.
  • High noise immunity: VNIH = VNIL = 28% VCC (min).
  • Output drive capability: 15 LSTTL loads.
  • Symmetrical output impedance: |IOH| = IOL = 6 mA (min).
  • Balanced propagation delays: tpLH ∼.
  • tpHL.
  • Wide operating voltage range: VCC (opr) = 2 to 6 V.
  • Pin and function compatible with 74LS564/574 TC74HC564AF, TC74HC574AF Weig.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TC74HC564AP/AF,574AP/AF TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HC564AP, TC74HC564AF TC74HC574AP, TC74HC574AF Octal D-Type Filp-Flop with 3-State Output TC74HC564AP/AF Inverting TC74HC574AP/AF Non-Inverting TC74HC564AP, TC74HC574AP The TC74HC564A and HC574A are high speed CMOS OCTAL FLIP-FLOPs with 3-STATE OUTPUT fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. These 8-bit D-type flip-flops are controlled by a clock input (CK) and an output enable input ( OE ). The TC74HC564A has inverting outputs, and the TC74HC574A has non-inverting outputs. All inputs are equipped with protection circuits against static discharge or transient excess voltage.