Datasheet4U Logo Datasheet4U.com

TC35274 - TOSHIBA MPEG-4 Video Decoder LSI

Description

System Reset Input (Low Active).

When the LSI is reset, this terminal has to be low for more than 16 clock cycles.

When power on, the LSI has to be reset after PLL locked.

Features

  • U A single-chip MPEG-4 video decoder LSI performs 15frames/sec of MPEG-4 video decoding with QCIF (176x144 pixels) at 30MHz clock frequency. U A 4-Mbit embedded DRAM is integrated to reduce power consumption without performance degradation. U An MPEG-4 video core consists of a 16-bit RISC processor and dedicated hardware accelerators so as to bring programmability, high performance, and low power consumption. P-FBGAxxxx U Firmware program for the RISC is downloaded into the embedded DRAM.

📥 Download Datasheet

Datasheet preview – TC35274

📁 Similar Datasheet

  • TC3520 - TIN CAN PRESS-FIT DIODE (WON-TOP)
  • TC3524 - TIN CAN PRESS-FIT DIODE (WON-TOP)
  • TC3500 - TIN CAN PRESS-FIT DIODE (WON-TOP)
  • TC3500H - SURFACE MOUNT THYRISTOR SURGE PROTECTIVE DEVICE (Lite-On Technology)
  • TC3500H - SURFACE MOUNT THYRISTOR SURGE PROTECTIVE DEVICE (Lite-On)
  • TC3501 - TIN CAN PRESS-FIT DIODE (WON-TOP)
  • TC3502 - TIN CAN PRESS-FIT DIODE (WON-TOP)
  • TC3503 - TIN CAN PRESS-FIT DIODE (WON-TOP)
  • TC3504 - TIN CAN PRESS-FIT DIODE (WON-TOP)
  • TC3505 - TIN CAN PRESS-FIT DIODE (WON-TOP)
Other Datasheets by Toshiba Semiconductor
  • TC35273 - MPEG-4 Audiovisual LSI
  • TC35095P - 8 BIT 8 CH SERIAL I/O ANALOG TO DIGITAL CONVERTER

Full PDF Text Transcription

Click to expand full text
Preliminary TOSHIBA MPEG-4 Video Decoder LSI MPEG-4 Video Decoder LSI TC35274 TC35274 Tentative Technical Data Sheet MPEG-4 Video Decoder LSI Features U A single-chip MPEG-4 video decoder LSI performs 15frames/sec of MPEG-4 video decoding with QCIF (176x144 pixels) at 30MHz clock frequency. U A 4-Mbit embedded DRAM is integrated to reduce power consumption without performance degradation. U An MPEG-4 video core consists of a 16-bit RISC processor and dedicated hardware accelerators so as to bring programmability, high performance, and low power consumption. P-FBGAxxxx U Firmware program for the RISC is downloaded into the embedded DRAM before starting operation. Other applications, such as H.263, are performed by using appropriate firmware.
Published: |