Datasheet4U Logo Datasheet4U.com

TA8409S - BRIDGE DRIVER

Download the TA8409S datasheet PDF. This datasheet also covers the TA8409 variant, as both devices belong to the same bridge driver family and are provided as variant models within a single manufacturer datasheet.

General Description

Pin No.

1 2 3 4 5 6 7 8 9 10 Symbol IN2 VCC OUT2 NC GND NC VS OUT1 Vref IN1 Input terminal Supply voltage terminal for logic Output terminal Non-connection GND terminal Non-connection Supply voltage terminal for motor driver Output terminal Reference voltage terminal for control circuit.

Key Features

  • z Modes available (CW/CCW/STOP/BRAKE) z Output current up to 0.4 A (AVE) and 1.0 A (PEAK) z Wide range of operating voltages VCC (opr. ) = 4.5 to 20 V VS (opr. ) = 0 to 20 V Vref (opr. ) = 0 to 20 V (Vref ≤ VS) z Built-in thermal shutdown z Standby mode available (STOP MODE) z Hysteresis for all inputs. TA8409F/FG Weight SIP9.
  • P.
  • 2.54A: 0.92 g (typ. ) SSOP10.
  • P.
  • 225.
  • 1.00: 0.09 g (typ. ) TA8409FG/SG: The TA8409FG/SG is a Pb-free product. The following conditions.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TA8409_ToshibaSemiconductor.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
TA8402F Phase Hall Motor Driver Toshiba
TA8403K POWER AMPLIFIER Toshiba
TA8407F DUAL POWER OPERATIONAL AMPLIFIER Toshiba
TA8407P DUAL POWER OPERATIONAL AMPLIFIER Toshiba
TA8415P CONTROLLER/DRIVER ETC

Other Datasheets by Toshiba

Part Number Description
TA8409SG BRIDGE DRIVER
TA8409F BRIDGE DRIVER
TA8409FG BRIDGE DRIVER
TA84002F TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT MULTI-CHIP
TA8400P DUAL BRIDGE DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TA8409S/SG, F/FG TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA8409S/SG, TA8409F/FG Bridge Driver The TA8409S/SG and TA8409F/FG are bridge drivers with output voltage control. TA8409S/SG Features z Modes available (CW/CCW/STOP/BRAKE) z Output current up to 0.4 A (AVE) and 1.0 A (PEAK) z Wide range of operating voltages VCC (opr.) = 4.5 to 20 V VS (opr.) = 0 to 20 V Vref (opr.) = 0 to 20 V (Vref ≤ VS) z Built-in thermal shutdown z Standby mode available (STOP MODE) z Hysteresis for all inputs. TA8409F/FG Weight SIP9−P−2.54A: 0.92 g (typ.) SSOP10−P−225−1.00: 0.09 g (typ.) TA8409FG/SG: The TA8409FG/SG is a Pb-free product. The following conditions apply to solderability: *Solderability 1.