Datasheet4U Logo Datasheet4U.com

TPD4206F - High Voltage 3-phase motor driver

Description

Pin No.

Unused pin, which is not connected to the chip internally.

Features

  • Weight: 1.2 g (typ. ).
  • High voltage power side and low voltage signal side terminal are separated.
  • It is the best for current sensing in three shunt resistance.
  • Bootstrap circuit gives simple high-side supply.
  • Bootstrap diodes are built in.
  • A dead time can be set as a minimum of 1.4 μs, and it is suitable for a Sine-wave drive.
  • 3-phase bridge output using MOSFETs.
  • Included over-current and under-voltage protection and shutdown.

📥 Download Datasheet

Datasheet Details

Part number TPD4206F
Manufacturer Toshiba
File Size 568.13 KB
Description High Voltage 3-phase motor driver
Datasheet download datasheet TPD4206F Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPD4102K DC Brushless Motor-Driver Toshiba Semiconductor
TPD4105AK DC Brushless Motor-Driver Toshiba Semiconductor
TPD4105K DC Brushless Motor-Driver Toshiba Semiconductor
TPD4111K DC Brushless Motor-Driver Toshiba Semiconductor
TPD4112K DC Brushless Motor-Driver Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TPD4204F High Voltage 3-phase motor driver
TPD4207F High Voltage 3-phase motor driver IC
TPD4005K 3-Phase DC Brush Less Motor Driver
TPD4008K High Voltage Monolithic Silicon Power-IC
TPD4011K High Voltage Monolithic Silicon Power-IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TOSHIBA Intelligent Power Device High Voltage 3-phase motor driver IC TPD4206F TPD4206F The TPD4206F is a DC brush less motor driver using high voltage PWM control. It is fabricated by high voltage MOSFET (500 V). It is three-shunt resistor circuit for current sensing. It contains level shift high-side driver, low-side driver, MOSFET outputs, and protective functions for over-current circuit and shutdown function and under voltage protection circuits and thermal shutdown circuit. It is easy to control a DC brush less motor by just putting logic inputs from a MPU or motor controller to the TPD4206F. P-SSOP30-1120-1.00-001 Features Weight: 1.2 g (typ.) • High voltage power side and low voltage signal side terminal are separated.
Published: |