TMPA901CMXBG
Description
Base address = 0x0000_0000
Note1: Case of this register (SAMPLE): 00000001 address because 00000000 address (hex)+0001 address (hex) Note2: This register is sample register. There is not this data book. b) SFR (register) description
- ç Basically, each register is structured 32 bit register. (There is a part of exception.)
- ç Each description shows Bit, Bit Symbol, Type, Reset value and Description
.
Bit
[31:8] [7:6]
・・・
Bit Symbol
- SAMPLE76
・・・
Type
- R/W
Reset Value
Undefined 0y00
・・・
・・・
Address = (0x0000_0000) + 0x0001
Description
Read as undefined. Write as zero. Sample 設定 0y00: Set to Sample mode 0 0y01: Set to Sample mode 1 0y10: Set to Sample mode 2 0y11: Set to Sample mode 3 ・・・
Note1: Basically 3types. R/W(READ/WRITE): Enable Read/Write RO(READ ONLY): Enable Read only WO(WRITE ONLY): Enable Write only
ç
There are exception types (USB device controller, USB host controller and SD host controller). Please refer to those sections.
Note2: Bit state...