TMP88CH40 Datasheet | Toshiba

Features - - - - 8-bit single-chip microputer: TLCS-870/X Series Minimum instruction execution time: 0.20 µs (at 20.0 MHz operation) Fundamental machine instruction: 181 kinds, 842 instructions I/O port: 19 pins - Large-current output: 14 pins (typ. 20 m A), capable of LED direct drive Watchdog Timer (WDT) Time Base Timer (TBT) Programmable motor driver: 1 channel (PMD2) - Sine wave drive circuit (RAM for sine wave data is incorporated.) - Rotor position detection function - Timer and capture function for montor controlling - Overload protective function - Start functions for automatic mutation and automatic position detection P-SOP28-450-1.27 -0.80D TMP88CH40N P-SDIP28-400-1.78 - - - TMP88CH40M 000707EBP1 - For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality and Reliability Assurance / Handling Precautions. - TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to ply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices, ” or “TOSHIBA Semiconductor Reliability Handbook” etc.. - The TOSHIBA products listed in this document are intended for usage in general electronics applications (puter, personal equipment, office equipment, measuring equipment, industrial robotics,...