TMP47C101M Datasheet | Toshiba

Features - 4-bit single chip microputer - Instruction execution time: 1.3µs (at 6MHz) - Low voltage operation: 2.2V (at 2MHz RC) - 89 basic instructions - Instruction set is the same as TLCS-47 series - ROM table look-up instructions - Subroutine nesting: 15 levels max. - 5 interrupt sources (External: 2, Internal: 3) - All sources have independent latches each, and multiple interrupt control is available - I/O port (11 pins) - 12-bit Timer/Counters (TC2) - Timer, event counter, and pulse width measurement mode - 12-bit programmable Timer (TC1) - Interval Timer - High current outputs - LED direct drive capability: typ. 20m A x 4 bits (Port R4) - Hold function - Battery/Capacitor back-up - Real Time Emulator: BM4721A + BM1160 (for DIP) w w .D w t a S a e h t e U 4 .c TMP47C990E + BM1160 (for DIP) m o The information contained here is subject to change without notice. The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic equipments (office equipment, munication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, bustion control, all types of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA. TOSHIBA CORPORATION 1/32 .. TMP47C101/201 Pin Assignment (Top View) Pin Function Pin Name R43...