Datasheet4U Logo Datasheet4U.com

TLP170AM - Photocouplers Photorelay

Features

  • (1) Halogen-free For details, see "Devices in Halogen-Free Resin Packages" at the end of this datasheet. (2) Normally opened (1-Form-A) (3) OFF-state output terminal voltage: 60 V (min) (4) Trigger LED current: 1 mA (max) (5) ON-state current: 700 mA (max) (6) ON-state resistance: 0.3 Ω (max) (7) Isolation voltage: 3750 Vrms (min) (8) Safety standards UL-recognized: UL 1577, File No. E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No. E67349 VDE-approved: EN 60747-5-5 (Note 1) N.

📥 Download Datasheet

Datasheet Details

Part number TLP170AM
Manufacturer Toshiba
File Size 299.70 KB
Description Photocouplers Photorelay
Datasheet download datasheet TLP170AM Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TLP172A Photocoupler Photorelay Toshiba Semiconductor
TLP172G Photocoupler Photorelay Toshiba Semiconductor
TLP173A Photocoupler Photorelay Toshiba Semiconductor
TLP174G Photocoupler Photorelay Toshiba Semiconductor
TLP174GA Photocoupler Photorelay Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TLP170A Photocoupler
TLP170D Photocoupler
TLP170G Photocoupler
TLP170GM Photocouplers Photorelay
TLP170J Photocoupler

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Photocouplers Photorelay TLP170AM TLP170AM 1. Applications • Security Systems • Factory Automation (FA) • Measuring Instruments • I/O Interface Boards • Programmable Logic Controllers (PLCs) • Mechanical relay replacements 2. General The Toshiba TLP170AM consists of an infrared LED coupled to a photo-MOSFET in a 4-pin SO6 package. This photorelay has higher output current rating than phototransistor-type photocoupler; hence, it is suitable for use as On/Off control for high current. 3. Features (1) Halogen-free For details, see "Devices in Halogen-Free Resin Packages" at the end of this datasheet. (2) Normally opened (1-Form-A) (3) OFF-state output terminal voltage: 60 V (min) (4) Trigger LED current: 1 mA (max) (5) ON-state current: 700 mA (max) (6) ON-state resistance: 0.