TC7710AWBG Overview
I/O pin for USB VBUS / Input pin for AC adapter Charge DC voltage input mode (+4.35V to +6.5V) I/O OTG Voltage 5V output mode The capacitor of 1.0µF or more must be connected between DCIN pin and GND to stabilize the voltage. I/O pin (+) for power source detection I/O It is connected to D+ pin of the USB connector. I/O pin (-) for power source detection I/O It is connected to D- pin of the USB connector.
TC7710AWBG Key Features
- Input voltage
- Battery Charging Specification 1.2 detection
- Battery shutdown current
- Maximum charge current
- Protections and detections
- Input over voltage protection (IOVP)
- Under voltage lock out (UVLO)
- Input current control
- Battery voltage monitor
- Battery temperature monitor