Datasheet4U Logo Datasheet4U.com

TC74LCX16373FT - Low-Voltage 16-Bit D-Type Latch

Features

  • Low-voltage operation: VCC = 2.0 to 3.6 V.
  • High-speed operation: tpd = 5.4 ns (max) (VCC = 3.0 to 3.6 V).
  • Ouput current: |IOH|/IOL = 24 mA (min) (VCC = 3.0 V).
  • Latch-up performance:.
  • 500 mA.
  • Package: TSSOP.
  • Power-down protection provided on all inputs and outputs Weight: 0.25 g (typ. ) Start of commercial production 2002-03 1 2014-03-01 Pin Assignment (top view) 1OE 1 1Q1 2 1Q2 3 GND 4 1Q3 5 1Q4 6 VCC 7 1Q5 8 1Q6 9 GND 10 1Q7 11.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TC74LCX16373AFT LOW-VOLTAGE 16-BIT D-TYPE LATCH Toshiba Semiconductor
TC74LCX16374AFT LOW-VOLTAGE 16-BIT D-TYPE FLIP-FLOP Toshiba Semiconductor
TC74LCX163245FT 16-Bit Dual Supply Bus Transceiver Toshiba Semiconductor
TC74LCX16240AFT LOW-VOLTAGE 16-BIT BUS BUFFER Toshiba Semiconductor
TC74LCX16240FT Low-Voltage 16-Bit Bus Buffer Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TC74LCX16374FT Low-Voltage 16-Bit D-Type Flip-Flop
TC74LCX16245FT Low-Voltage 16-Bit Bus Transceiver
TC74LCX125FK Low-Voltage Quad Bus Buffer
TC74LCX126F Low-Voltage Quad Bus Buffer
TC74LCX126FK Low-Voltage Quad Bus Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TC74LCX16373FT TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74LCX16373FT Low-Voltage 16-Bit D-Type Latch with 5-V Tolerant Inputs and Outputs The TC74LCX16373FT is a high-performance CMOS 16-bit D-type latch. Designed for use in 2.5-V or 3.3-V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. The device is designed for low-voltage (2.5-V or 3.3-V) VCC applications, but it could be used to interface to 5-V supply environment for both inputs and outputs. This 16-bit D-type latch is controlled by a latch enable input (LE) and an output enable input ( OE ) which are common to each byte. It can be used as two 8-bit latches or one 16-bit latch. When the OE input is high, the outputs are in a high-impedance state.
Published: |