TB6631FNG
Description
Oscillator capacitor 2 OSC/R Oscillator resistor CR oscillation 3 HUP Position signal input, U 4 HUM 5 HVP Position signal input, V 6 HVM 7 HWP Position signal input, W 8 HWM Gate block protection is activated when position signal (UVW) = HHH or LLL. These inputs have internal pull up resistors and digital filters ( ∼- 500 ns) 9 GND Ground ― 10 RES Reset input L: Runs the motor.
Key Features
- Sine-wave PWM control
- Triangular-wave generator (with a carrier frequency of fosc/252 Hz)
- Lead angle control (0° to 58° in 32 separate steps) Automatic internal control by FG frequency
- Current-limiting input pin
- Voltage regulator (Vrefout = 5 V (typ.), 30 mA (max))
- Operating supply voltage range: VCC = 7 V to 16.5 V Weight: 0.17 g (typ.) © 2015 TOSHIBA Corporation 1 2015-10-08
