Datasheet4U Logo Datasheet4U.com

TA8440HQ - Full-bridge Driver (H-Switch)

Description

1 ENABLE ENABLE terminal output is OFF when L 2 IN Forward rotation/reverse rotation switch terminal 3 BRAKE BRAKE terminal output is OFF when L 4 SG Signal GND 5 CHOP PWM signal input terminal 6 VCC Power voltage supply terminal for control 7 VS Power voltage supply terminal for motor driver

Features

  • z Output current is up to 1.5 A (AVE. ) and 3.0 A (PEAK). z 4 modes of forward, reverse, stop, and braking are available and a back-electromotive force absorbing diode has been built-in. z Thermal shutdown circuit incorporated z Input is compatible with CMOS. z Built-in input pull-up resistor. BRAKE = 200 kΩ (typ. ) z Built-in input pull-down resistor. IN, ENABLE = 100 kΩ (typ. ) Weight: 4.04 g (typ. ) The TA8440HQ: The TA8440HQ is Sn-Ag plated product including Pb. The following conditions apply.

📥 Download Datasheet

Datasheet Details

Part number TA8440HQ
Manufacturer Toshiba
File Size 359.33 KB
Description Full-bridge Driver (H-Switch)
Datasheet download datasheet TA8440HQ Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TA84002F TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT MULTI-CHIP Toshiba Semiconductor
TA8400P DUAL BRIDGE DRIVER Toshiba Semiconductor
TA8401F FUNCTIONAL BRIDGE DRIVER Toshiba Semiconductor
TA8405S DUAL BRIDGE DRIVER Toshiba Semiconductor
TA8406F DUAL POWER OPERATIONAL AMPLIFIER Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TA8440H DC MOTOR FULL BRIDGE DRIVER
TA8440F DC MOTOR FULL BRIDGE DRIVER
TA8443F PLL PWM 3-Phase Hall Motor Pre-Driver
TA8445K POWER AMPLIFIER FOR DRIVING A DEFLECTION CIRCUIT OF A COLOR TELEVISION
TA8449P QUAD POWER OP AMP

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TA8440H/HQ TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA8440H/HQ Full-bridge Driver (H-Switch) for DC Motor (Driver for Switching between Forward and Reverse Rotation) The TA8440H/HQ is a full-bridge driver for selecting the forward and reverse running of a motor with brushes and can control four modes: forward, reverse, stop and braking. The motor driving unit and the control unit have a separate power supply line, and the TA8440H/HQ can also be used as a stepping motor driver. Features z Output current is up to 1.5 A (AVE.) and 3.0 A (PEAK). z 4 modes of forward, reverse, stop, and braking are available and a back-electromotive force absorbing diode has been built-in. z Thermal shutdown circuit incorporated z Input is compatible with CMOS.