TA8272HQ Overview
is made only on the single channel.) 1. Voltage Gain Adjustment This IC has no NF (negative feedback) terminals. Therefore, the voltage gain can’t adjusted, but it makes the device a space and total costs saver.
TA8272HQ Key Features
- High power : POUTMAX (1) = 43 W (typ.) (VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 Ω)
- Built-in diagnosis circuit (pin 25)
- Low distortion ratio: THD = 0.02% (typ.)
- Low noise: VNO = 0.10 mVrms (typ.)
- Built-in stand-by switch function (pin 4)
- Built-in muting function (pin 22)
- Built-in AUX amplifier from single input to 4 channels output (pin 16)
- Built-in various protection circuit
- Operating supply voltage: VCC (opr) = 9~18 V
- In case of the product would be operated with exceeded guaranteed operating ranges, these protection features may not op