Datasheet4U Logo Datasheet4U.com

XC9248 - Synchronous Step-Down DC/DC Converter

Description

The XC9248 series is 18V bootstrap synchronous step-down DC/DC converter with built-in Nch-Nch driver transistors.

Features

  • Input Voltage ： 4.5V ~ 18V Output Voltage ： 1.0V ~ 12V (VFB=0.8V±1.5%) (.
  • 1) Output Current ： 2.2A Efficiency ： 93.8% (.
  • 1) @VIN=12V,VOUT=5V, IOUT=700mA Oscillation Frequency ： 500kHz Maximum Duty Cycle ： 79% Soft-Start Time ： Fixed 2.8ms, set by external capacitor Protection Circuit ： UVLO High side over current protection Low side over current protection VOUT Short-circuit Protection LX Short-circuit Protection VOUT Over voltage protection Thermal shutdown Package ：.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XC9242 2A Synchronous Step-Down DC/DC Converter Torex
XC9243 2A Synchronous Step-Down DC/DC Converter Torex
XC9244 Step-Down DC/DC Converter Torex
XC9245 Step-Down DC/DC Converter Torex
XC9260 Step-Down DC/DC Converter Torex

Other Datasheets by Torex Semiconductor

Part Number Description
XC9246 16V Driver Transistor Built-In Step-Down DC/DC Converters
XC9247 16V Driver Transistor Built-In Step-Down DC/DC Converters
XC9201 PWM Controlled Step-Down DC/DC Converters
XC9206 PWM/PFM Switchable Step-Down DC/DC Converters
XC9207 PWM/PFM Switchable Step-Down DC/DC Converters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XC9248 Series ETR05022-008 18V Driver Transistor Built-In Synchronous Step-Down DC/DC Converter ■GENERAL DESCRIPTION The XC9248 series is 18V bootstrap synchronous step-down DC/DC converter with built-in Nch-Nch driver transistors. With an input voltage range from 4.5V to 18V and a maximum output current of 2.2A, the series is suitable for digital home appliance power supplies and can be used with small ceramic capacitors. The series has a 0.8V reference voltage, and using externally connected resistors, the output voltage can be set freely from 1.0V to 12V. The control method is synchronous PWM (Source/ Sink). The soft start time is internally set to 2.8ms (TYP.), also can be adjusted using external capacitor.
Published: |