Datasheet4U Logo Datasheet4U.com

XC9519 - Dual Output Step-Up/Inverting DC/DC Converter

Description

The XC9519 series is a 2 channel (step-up and inverting) DC/DC converter IC.

One DC/DC converter is a step-up DC/DC and the other is an inverting DC/DC converter.

Features

  • nput Voltage : 2.7V ~ 5.5V Output Current Positive Output Voltage Negative Output Voltage : 500mA @VIN=3.7V, VOUTP=5.0V, VOUTN=-5.0V : 4.0V (.
  • 1) ~ 18.0V (accuracy ±1.5% @25oC) : -15.0V (.
  • 2) ~ -4.0V (accuracy ±1.5% @25oC) Oscillation Frequency : 1.2MHz Soft-Start Circuit Built-In : Step-up DC/DC converter 2.5ms (TYP. ) : Inverting DC/DC converter 2.2ms (TYP. ) Protection Circuits : Over Current Limit (Integral Latching) Short Protection Latching UVLO Thermal Shutdown Over Voltage.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XC9510 Synchronous Step-Down DC/DC Converter Torex Semiconductor
XC95108 XC95108 In-System Programmable CPLD Xilinx
XC9511 Synchronous Step-Down DC/DC Converter Torex Semiconductor
XC95144 XC95144 In-System Programmable CPLD Xilinx
XC95144XL High Performance CPLD Xilinx

Other Datasheets by Torex Semiconductor

Part Number Description
XC9515 2-channel Synchronous Step-Down DC/DC Converter
XC9516 Triple Output Power Supply
XC9120 Step-Up DC/DC Controller
XC9121 Step-Up DC/DC Controller
XC9122 Step-Up DC/DC Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XC9519 Series ETR0710-009 Dual Output Step-Up/Inverting DC/DC Converter ■GENERAL DESCRIPTION The XC9519 series is a 2 channel (step-up and inverting) DC/DC converter IC. One DC/DC converter is a step-up DC/DC and the other is an inverting DC/DC converter. The step-up converter compares a built-in reference voltage 1.0V to the FBP voltage (accuracy ±1.5%) and a positive output voltage can be set freely with the external components up to 18V. The inverting DC/DC converter compares a difference between a reference voltage and the FBN voltage (accuracy ±1.5%) to the GND, then a negative output voltage can be set until -15V with the external components. With a 1.2MHz frequency, the size of the external components can be reduced.
Published: |