S2JKA Datasheet | Thinki Semiconductor

Features ¬ Low forward voltage drop ¬ High current capability ¬ Low reverse leakage current ¬ High surge current capability ¬ Glass passivated chip for Automotive Mechanical Data ¬ Case: Molded plastic SMA/DO-214AC ¬ Epoxy: UL 94V-0 rate flame retardant ¬ Terminals: Solderable per MIL-STD-750 method 2026 ¬ Polarity:Color band denotes cathode end ¬ Mounting position: Any ¬ Weight: 0.064 gram SMA/DO-214AC Unit: inch (mm) .114(2.90) .098(2.50) .062(1.60) .047(1.20) .181(4.60) .157(4.00) .012(.305) .006(.152) .096(2.44) .078(2.00) .060(1.52) .030(0.76) .008(.203) .002(.051) .208(5.28) .188(4.80) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25o C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL S2AKA S2BKA S2DKA S2GKA S2JKA S2KKA S2MKA UNIT Maximum Recurrent Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current TA=110o C I(AV) Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) IFSM Maximum Instantaneous Forward Voltage @ 2.0 A Maximum DC Reverse Current @TJ=25o C At Rated DC Blocking Voltage @TJ=125o C Typical junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Junction and Storage Temperature Range IR CJ R JA TJ,TSTG NOTES : (1) Thermal Resistance junction to ambient. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. 200 400 600 140 280 420 200 400...