• Part: TD8588
  • Description: 1.2MHz Synchronous Boost Converter
  • Manufacturer: Techcode
  • Size: 600.70 KB
Download TD8588 Datasheet PDF
Techcode
TD8588
TD8588 is 1.2MHz Synchronous Boost Converter manufactured by Techcode.
Description   Features     The TD8588 is a synchronous rectifier, fixed switching frequency (1.2MHz typical), and current‐mode step‐up regulator. The device allows use of small inductors and output capacitors for USB devices. The current‐mode control  scheme provides fast transient response and good output  voltage accuracy.  At light loads, the TD8588 will automatically enter in Pulse  Frequency Modulation (PFM) operation to reduce the  dominant switching losses. During PFM operation,the IC  consumes very low quiescent current and maintains high  efficiency over the plete load range.The TD8588 also  includes current‐limit and overtemperature shutdown to  prevent damage in the event of an output overload.  The TD8588 is available in ESOP‐8 packages.  - - - - - - - - - - - - - - - 92%Effiicency Synchronous Boost Converter With 1000‐m A Output Current From 1.8V Input  Stable with Low ESR Output Capacitors  Fixed 1.2MHz Oscillator Frequency  Low EMI Converter (Integrated Anti‐Ringing Function)  Low Battery Output  Integrated Power Save Mode Operation to Improve Light  Load Efficiency  On load startup  Automatic restart after protection  Load Disconnected During Shutdown  Output Current‐Limit Protection  Over Temperature Protection  Under Voltage Protection  Enable/Shutdown Function  Available in ESOP‐8 Packages  Lead Free and Green Devices Available(Ro HS pliant) Applications  - Power Bank  - Tablet  - Portable Equiment  Pin Configurations  October,  20,  2011.                                                        Techcode  Semiconductor  Limited                                                  .techcodesemi.  1  T  echcode®       5V 6A 1.2MHz Synchronous Boost Converter Pin Description   NO.  1  2  3  4  5  6  7  8    NAME  VBAT PSI GND FB VOUT SW  PGND FUNCTION  Converter Supply Voltage.  Power Saving Input. Force VPSI exceed 1V enter PFM. Left VPSI below 0.4V enter PWM mode  Device Enable Control Input. Force VEN exceed 1V enable the dev...