Datasheet4U Logo Datasheet4U.com

TS9230 - 3A Ultra Low Dropout Voltage Regulator

Description

The TS9230 is a 3A ultra low dropout voltage regulator.

This product is specifically designed to provide well supply voltage for front-side-bus termination on motherboards and NB applications.

Features

  • Ultra Low Dropout 200mV(typ) @ IOUT=3A Suit for Low ESR Output Capacitor (MLCC) 0.5V Reference Voltage Fast Transient Response Adjustable Output Voltage Power-On-Reset for VCNTL and VIN Pins Internal Soft-Start Under-Voltage Protection Current-Limit Protection Thermal Shutdown Protection Power-OK Output with a Delay Time Ordering Information Part No. TS9230CS RLG Package SOP-8EP Packing 2.5Kpcs / 13” Reel Note: “G” denote for Ha.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TS920E Lithium Rechargeable Battery Seiko
TS921 RAIL TO RAIL HIGH OUTPUT CURRENT QUAD OPERATIONAL AMPLIFIER ST Microelectronics
TS922 RAIL TO RAIL HIGH OUTPUT CURRENT QUAD OPERATIONAL AMPLIFIER ST Microelectronics
TS9222 (TS9222 / TS9224) high stability dual and quad operational amplifiers ST Microelectronics
TS9224 (TS9222 / TS9224) high stability dual and quad operational amplifiers ST Microelectronics

Other Datasheets by Taiwan Semiconductor

Part Number Description
TS9004 300mA CMOS LDO Adjustable Voltage
TS9005 600mA Low Noise CMOS LDO
TS9006 150mA Low Noise CMOS LDO
TS9007 300mA Low Noise CMOS LDO
TS9008 300mA High PSRR Low Noise CMOS LDO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TS9230 3A Ultra Low Dropout Voltage Regulator SOP-8EP Pin Definition: 1. GND 8. EN 2. FB 7. POK 3. VOUT 6. VCNTL 4. VOUT 5. VIN General Description The TS9230 is a 3A ultra low dropout voltage regulator. This product is specifically designed to provide well supply voltage for front-side-bus termination on motherboards and NB applications. The IC needs two supply voltages, a control voltage for the circuitry and a main supply voltage for power conversion, to reduce power dissipation and provide extremely low dropout. The TS9230 integrates multi-functions. A Power-On-Reset (POR) circuit monitors both supply voltages to prevent wrong operations. A thermal shutdown and current limit functions protect the device against thermal and current over-loads.
Published: |