TESDA24VB30P2CX Datasheet | Taiwan Semiconductor

Taiwan Semiconductor Bi-directional ESD Protection Diode DESCRIPTIONS The TESDA24VB30P2CX is Bidirectional ESD rated clamping cell to protect power interfaces, or control line, or low speed data line in an electronic system. It has been specifically designed to protect sensitive electronic ponents which are connected to power and control lines from over-voltage damage by Electrostatic Discharging (ESD), and Lightning. ESD protection device in a small SOT-23 Surface Mounted Device (SMD) plastic package designed to protect two automotive In-vehicle network bus lines from the damage caused by Electrostatics discharge (ESD) and other transients. Features - AEC-Q101 qualified - ESD protect for 2 line with bidirectional. - Provide ESD protection for each channel to IEC61000-4-2 (ESD) ±30k V (air), ±30k V(contact) IEC61000-4-4 (EFT) 4k V (5/50ns) IEC61000-4-5 (Lightning) 5A (8/20μs) - Suitable for 24V and below, operating voltage applications - Protect I/O line or power line. - Moisture sensitivity level: level 1, per J-STD-020 - Ro HS pliant - Halogen-Free The TESDA24VB30P2CX may be used to provide ESD protection up to ±30k V(contact and air discharge) according to IEC61000-4-2, and withstand peak pulse current up to 5A (8/20μs) according to IEC61000-4-5. APPLICATION - ESD protection for In-vehicle network lines in automotive environments - CAN Bus - General Purpose I/O - Portable Instrumentation - Mobile & Handhelds PACKAGE: SOT-23 PIN CONFIGURATION CIRCUIT DIAGRAM Version: A2403 Taiwan...