OPR5005 Datasheet | TT Electronics

Features : - High temperature operation - Surface mountable - pact size - Excellent ambient light protection Description : The OPR5005 is a miniature reflective sensor that bines a silicon phototransistor with a Ga AIAs LED in a hightemperature opaque polyamide chip carrier. It is designed to sense the motion or proximity of diffuse reflective surfaces in space-limited applications. The opaque package insures very low cross-talk and shields the phototransistor from ambient light sources, while the silicone encapsulated package allows operation over a wide temperature range. The gold-plated wraparound solder pads offer exceptional storage and wetting characteristics. See Application Bulletin 237 for handling instructions. Applications: - Motion sensors - Space-limited applications - Applications requiring ambient light protection - Can be stored in dirty Reflective Switch Part Number Ordering Information LED Peak Wavelength Sensor # of Elements 890 nm Phototransistor IC(ON) (µA) Min IF (m A) VCE Packaging Typ / Max Typ / Max 20 / 50 5 / 30 Chip Tray Warning: Front Windows are pressure sensitive. Do not apply pressure or high vacuum to window. Ro HS General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc Pin # 1 2 3 4 Description Collector Anode Cathode Emitter OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 .optekinc. | .ttelectronics. Issue E 05/2018 Page 1 Electrical Specifications Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage and Operating Temperature Solder reflow time within 5°C of peak temperature is 20 to 40 seconds(1) LED Forward DC Current Peak Forward Current (1 µs pulse; .03% duty cycle) Reverse DC Voltage Power Dissipation(2) Phototransistor Collector-Emitter Voltage...