Datasheet4U Logo Datasheet4U.com

OPL800TXV - Hermetic Sensors

Description

The OPL800TXV is a high reliability optoelectronic microcircuit that incorporates a photodiode, linear amplifier and Schmitt trigger on a single silicon chip.

Features

  • 100% screened and quality conformance tested to Optek’s High Reliability program.
  • Direct TTL/STTL interface.
  • Hermetic, lensed TO-18 package.
  • Mechanically and spectrally matched to OP235/OP236TX/TXV LEDs.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
OPL110 OPTICALLY COUPLED ISOLATORS ETC
OPL1264A (OPL1264 / OPL1265) Optocouplers Three-Five Systems
OPL1264B (OPL1264 / OPL1265) Optocouplers Three-Five Systems
OPL1264C (OPL1264 / OPL1265) Optocouplers Three-Five Systems
OPL1265A (OPL1264 / OPL1265) Optocouplers Three-Five Systems

Other Datasheets by TT Electronics

Part Number Description
OPL800 Photologic Hermetic Sensor
OPL800-OC Photologic Hermetic Sensor
OPL801 Photologic Hermetic Sensor
OPL801-OC Photologic Hermetic Sensor
OPL810 Photologic Hermetic Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
High Reliability Photologic® Hermetic Sensors OPL800TXV Features: • 100% screened and quality conformance tested to Optek’s High Reliability program • Direct TTL/STTL interface • Hermetic, lensed TO-18 package • Mechanically and spectrally matched to OP235/OP236TX/TXV LEDs Description: The OPL800TXV is a high reliability optoelectronic microcircuit that incorporates a photodiode, linear amplifier and Schmitt trigger on a single silicon chip. The device features TTL/STTL compatible logic level output which can drive up to 8 TTL loads without additional interface circuitry. The Photologic® chip is mounted on a standard TO-18 header with gold plated leads which is hermetically sealed in a lensed gold plated metal can.
Published: |