Datasheet4U Logo Datasheet4U.com

OPB917 - Optical Switch

Description

The OPB917 series of Photologic® photo integrated circuit switches provide op mum flexibility.

Each switch consists of an infrared Light Emi ng Diode (LED) and a Photologic® photo integrated circuit, mounted in an opaque housing with clear windows for dust protec on.

Features

  •  Low power consump on.
  •  Data rates to 250 kBaud.
  •  Choice of two logic states and two electrical outputs.
  •  24” (610 mm) minimum 26 AWG UL listed wires.
  •  Slot width 0.20” (5.08 mm).
  •  Slot Depth 0.86” (21.84 mm).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
OPB930 Photologic Slotted Optical Switches OPTEK
OPB930L Photologic Slotted Optical Switches OPTEK
OPB930W Photologic Slotted Optical Switches OPTEK
OPB940 Photologic Slotted Optical Switches OPTEK
OPB940L Photologic Slotted Optical Switches OPTEK

Other Datasheets by TT Electronics

Part Number Description
OPB910 Optical Switches
OPB911 Optical Switch
OPB912 Optical Switch
OPB913 Optical Switch
OPB916 Optical Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Photologic® Slotted Optical Switch OPB917 Series Features:  Low power consump on  Data rates to 250 kBaud  Choice of two logic states and two electrical outputs  24” (610 mm) minimum 26 AWG UL listed wires  Slot width 0.20” (5.08 mm)  Slot Depth 0.86” (21.84 mm) Description: The OPB917 series of Photologic® photo integrated circuit switches provide op mum flexibility. Each switch consists of an infrared Light Emi ng Diode (LED) and a Photologic® photo integrated circuit, mounted in an opaque housing with clear windows for dust protec on. The deep slot allows for a longer reach of the op cal path from the 0.650” (16.5 mm) moun ng plane. Internal apertures are 0.010” x .060” (.25 mm x 1.52 mm) for the Photologic’s “S” side and 0.05” x 0.06” (1.27 mm x 1.
Published: |