Datasheet4U Logo Datasheet4U.com

OPB660N - Slotted Optical Switch

General Description

Each OPB660 slotted optical switch consists of an infrared emitting diode and a NPN silicon phototransistor, combined with an enhanced low current roll-off that improves contrast ratio and provides immunity to background irradiance.

Key Features

  • Non-contact switching.
  • Printed circuit board mounting.
  • Enhanced signal to noise ratio.
  • Gap 0.125” (3.18mm) wide and 0.345” (8.76mm) deep slot.
  • Emitter Aperture 0.05” X 0.06” (1.27mm X 1.52mm),.
  • Sensor Aperture 0.01” X 0.06” (0.25mm X 1.52mm).

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Slotted Optical Switch OPB660N, OPB660T Features:  Non-contact switching  Printed circuit board mounting  Enhanced signal to noise ratio  Gap 0.125” (3.18mm) wide and 0.345” (8.76mm) deep slot  Emitter Aperture 0.05” X 0.06” (1.27mm X 1.52mm),  Sensor Aperture 0.01” X 0.06” (0.25mm X 1.52mm) Description: Each OPB660 slotted optical switch consists of an infrared emitting diode and a NPN silicon phototransistor, combined with an enhanced low current roll-off that improves contrast ratio and provides immunity to background irradiance. Housings are made from an opaque grade of injection-molded plastic to minimize sensitivity to both visible and near-infrared light.