OP599C Datasheet | TT Electronics

OP599 Series Features : - Dark blue injection-molded plastic package - Variety of sensitivity ranges - T-1¾ package style with TO-18 base - Excellent optical lens surface - Excellent chip placement Description: Each device in this series consists of a NPN silicon phototransistor mounted in a dark blue plastic injection molded shell package, with a narrow receiving angle that provides excellent on-axis coupling and optical/mechanical axis alignment. The shell also provides excellent optical lens surface, control of chip placement and consistency of the outside package dimensions. The OP599 series sensors are 100% production tested for close correlation with OPTEK Ga AIAs emitters. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Applications: - Applications requiring a narrow receiving angle - Applications that are space-limited Ordering Information Part Number OP599A OP599B OP599C Sensor Transistor Viewing Angle 20° Lead Length 0.75" OP599 Ro HS Pin # 1 2 DIMENSIONS ARE IN: [MILLIMETERS] INCHES Sensor Emitter Collector CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK'S molded plastics. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to...