OP216 Datasheet | TT Electronics

OP215, OP216 Features : - Hermetically sealed package - Mechanically and spectrally matched to other OPTEK devices - Designed for direct mount to PCBoard - Enhanced temperature range OP216 OP215 Description: Each OP215 and OP216 device is an 890 nm gallium aluminum arsenide infrared emitting diode (Ga AIAs), mounted in a hermetically sealed “pig tale” package with an enhanced temperature range and a narrow irradiance pattern that provides high on-axis intensity for excellent coupling efficiency. These devices offer significantly higher power output than Ga As at equivalent drive currents and have a wavelength that is matched to silicon’s peak response. Their small package size permits high device density mounting. The OP216A device provide an additional mounting tab connected to the Cathode/Case. these LEDs are mechanically and spectrally matched to the OP300 series, OP516, OP600 series and OP640 series devices. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data, and to Application Bulletin 202 for pill-type soldering to PCBoard. Applications: - Non-contact reflective object sensor - Assembly line automation - Machine automation - Machine safety - End of travel sensor Part Number OP215A OP216A Ordering Information LED Peak Optical Power m W/ Wavelength cm2 (Min) 890 mm Total Beam Angle 24° Pin # 1 2 LED Anode Cathode Ro HS General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323...