Datasheet4U Logo Datasheet4U.com

HA204 - SMD Choke

General Description

The HA204 series SMD Common Mode Choke (CMC) consists of total 7 part numbers.

There are various impedance range from 100Ω up to 2500Ω with rated current at 9.0A maximum.

The impedance is measured at 100MHz.

Key Features

  • Operating temperature range.
  • 40°C to +125°C.
  • AEC-Q200.
  • Low profile surface mount.
  • Compact design.
  • Various common mode and differential mode characteristic.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HA2099 A / D controller and Enhanced Capture / Compare / PWM module 8-bit Flash microcontroller Microchip
HA2-2520-2 20MHz/ High Slew Rate/ Uncompensated/ High Input Impedance/ Operational Amplifiers Intersil Corporation
HA2-2522-2 20MHz/ High Slew Rate/ Uncompensated/ High Input Impedance/ Operational Amplifiers Intersil Corporation
HA2-2525-5 20MHz/ High Slew Rate/ Uncompensated/ High Input Impedance/ Operational Amplifiers Intersil Corporation
HA2-2600-2 12MHz/ High Input Impedance Operational Amplifiers Intersil Corporation

Other Datasheets by TT Electronics

Part Number Description
HA220-15100RLF Wireless Coil Rx
HA220-20100TLF Wireless Coil Tx

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SMD Common Mode Choke HA204 Series Features: • Operating temperature range –40°C to +125°C • AEC-Q200 • Low profile surface mount • Compact design • Various common mode and differential mode characteristic Description: The HA204 series SMD Common Mode Choke (CMC) consists of total 7 part numbers. There are various impedance range from 100Ω up to 2500Ω with rated current at 9.0A maximum. The impedance is measured at 100MHz. Impedance performance curve (common mode and differential mode) can be found in datasheet. The insulation resistance between two windings is 10MΩ minimum. A maximum dimension is 8.0x6.2x4.0 mm. It has low profile and compact design for surface mounting. The HA204 series is AEC-Q200 certified.