900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






TRACO

TEL10-2413WI Datasheet Preview

TEL10-2413WI Datasheet

DC/DC Converter

No Preview Available !

DC/DC Converter
TEL 10WI Series, 10 Watt
Most compact 10 Watt converter in
DIP-16 metal casing
Highest power density of 3.83 W/cm3
6-side shielded metal case with
insulated base plate
Ultra wide 4:1 input voltage range
High efficiency for low thermal loss
Operating temperature range of
-40°C to +88°C
Built-in EN 55032 class A filter
Current limitation and protection
against short circuit
3 years product warranty
UL 62368-1
UL 60950-1
The TEL 10WI series is a range of isolated 10 Watt converters which come in a ultra com-
pact DIP-16 metal package. The design purpose of these series was to miniaturized low
power DC/DC converters to the maximum without sacrifing high efficency. The TEL 10WI
series sets the new standart for power density with 3.83 W/cm3.
The TEL 10WI series offer an ultra wide 4:1 input voltage range and feature a high ef-
ficiency of up to 86% which enables an operation temperature of up to +70°C at full load
and up to 88°C with 50% load.
The converters have an internal input filter to comply with conducted emission EN 55032
/ EN 55022 class A. The TEL 10WI Series models are an economical solution for space
critical and cost sensitive applications in instrumentation, IT and industrial electronics.
Models
Order code
TEL 10-2410WI
TEL 10-2411WI
TEL 10-2412WI
TEL 10-2413WI
TEL 10-2415WI
TEL 10-2422WI
MoTdEeLls10-2423WI
TEL 10-4810WI
TEL 10-4811WI
TEL 10-4812WI
TEL 10-4813WI
TEL 10-4815WI
TEL 10-4822WI
TEL 10-4823WI
Input voltage
9 - 36 VDC
(nominal 24 VDC)
18 - 75 VDC
(nominal 48 VDC)
Output voltage
3.3 VDC
5.1 VDC
12 VDC
15 VDC
24 VDC
±12 VDC
±15 VDC
3.3 VDC
5.1 VDC
12 VDC
15 VDC
24 VDC
±12 VDC
±15 VDC
Output current max.
2700 mA
2000 mA
833 mA
666 mA
416 mA
±416 mA
±333 mA
2700 mA
2000 mA
833 mA
666 mA
416 mA
±416 mA
±333 mA
Efficiency typ.
80 %
83 %
87 %
88 %
88 %
87 %
87 %
80 %
83 %
87 %
88 %
88 %
87 %
87 %
www.tracopower.com
Page 1 of 4




TRACO

TEL10-2413WI Datasheet Preview

TEL10-2413WI Datasheet

DC/DC Converter

No Preview Available !

TEL 10WI Series, 10 Watt
Input Specifications
Input current at no load
24 Vin models: 10 mA typ.
48 Vin models: 7 mA typ.
Surge voltage (1 s max.)
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Start up voltage
24 Vin models: 9 V (or lower)
48 Vin models: 18 V (or lower)
Under voltage shut down
24 Vin models: 8 V typ. / 7 V min.
48 Vin models: 16 V typ. / 15 V min.
Input filter internal Pi type
Recommended input fuse
24 Vin models: 2 A (slow blow type)
48 Vin models: 1 A (slow blow type)
Conducted noise EN 55032, FCC part 15
class A without external components
class B with external components
– Application note for filter class B proposal www.tracopower.com/overview/tel10wi
EMC immunity EN 55024
– ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,
perf. criteria A
– Radiated immunity EN 61000-4-3, 20 V/m, perf. criteria A
– Fast transient / surge EN 61000-4-4, ±2 kV, perf. criteria A
(with external components) EN 61000-4-5, ±2 kV perf. criteria A
24 Vin models: Pi-type: 2 pcs. 470uF/50V CHEMI-CON KY Series
& 1 pcs. 10uH/2.2A/0.1Ohm inductor: 732774100
48 Vin models: 1 pcs. 470uF/100V CHEMI-CON KY Series
– Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A
– Magnetic field immunity EN 61000-4-8, 100 A/m, perf. criteria A
Output Specifications
Voltage set accuracy ±1 % max.
Regulation
– Input variation (Vin min. to Vin max.) 0.2 % typ. / 0.8 % max.
– Load variation (0 – 100 %)
single output: 1 % max.
dual output: 1 % max. (balanced load)
– Output voltage balance
dual output: 1 % typ. / 2 % max. (balanced load)
– Cross regulation
dual output: 5 % max. (asymmetrical load 25 % / 100 %)
Temperature coefficient ±0.02 %/K max.
Ripple and noise (20 MHz Bandwidth)
3.3 & 5.1 Vout models: 60 mVp-p typ. / 75 mVp-p max.
other output models: 80 mVp-p typ. / 100 mVp-p max.
Start up time (constant resistive load)
30 ms typ. / 60 ms max.
Transient response time (25% load step change) 500 μs max.
Over current limitation 160 % typ. of Iout max.
195 % max. of Iout max.
Short circuit protection hiccup, automatic recovery
Capacitive load
– Single output
– Dual output
3.3 Vout models: 2600 µF max.
5.1 Vout models: 1300 µF max.
12 Vout models: 560 µF max.
15 Vout models: 560 µF max.
24 Vout models: 200 µF max.
±12 Vout models: 390 µF max. (each output)
±15 Vout models: 200 µF max. (each output)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2 of 4


Part Number TEL10-2413WI
Description DC/DC Converter
Maker TRACO
Total Page 4 Pages
PDF Download

TEL10-2413WI Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 TEL10-2413WI DC/DC Converter
TRACO





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy