Datasheet4U Logo Datasheet4U.com

TK11437 - VOLTAGE REGULATOR

Download the TK11437 datasheet PDF. This datasheet also covers the TK11430 variant, as both devices belong to the same voltage regulator family and are provided as variant models within a single manufacturer datasheet.

Description

The TK114xx is a low power, linear regulator with a builtin electronic switch.

The internal electronic switch can be controlled by an external pull-up resistor and an open drain or open collector transistor.

Features

  • s Low Dropout Voltage s Electronic ON/OFF Switch s Very Low Standby Current (ON, No Load) s Internal Thermal Shutdown s Short Circuit Protection s Very Low (.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TK11430-TOKO.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number TK11437
Manufacturer TOKO
File Size 225.47 KB
Description VOLTAGE REGULATOR
Datasheet download datasheet TK11437 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TK110A10PL Silicon N-Channel MOSFET Toshiba
TK110A65Z Silicon N-Channel MOSFET Toshiba
TK110E10PL Silicon N-Channel MOSFET Toshiba
TK110E65Z Silicon N-Channel MOSFET Toshiba
TK110N65Z Silicon N-Channel MOSFET Toshiba

Other Datasheets by TOKO

Part Number Description
TK11430 VOLTAGE REGULATOR
TK11432 VOLTAGE REGULATOR
TK11435 VOLTAGE REGULATOR
TK11440 VOLTAGE REGULATOR
TK11445 VOLTAGE REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TK114xx VOLTAGE REGULATOR WITH ON/OFF SWITCH FEATURES s Low Dropout Voltage s Electronic ON/OFF Switch s Very Low Standby Current (ON, No Load) s Internal Thermal Shutdown s Short Circuit Protection s Very Low (<100 nA) Current in OFF Mode s Customized Versions Are Available DESCRIPTION The TK114xx is a low power, linear regulator with a builtin electronic switch. The internal electronic switch can be controlled by an external pull-up resistor and an open drain or open collector transistor. The device is in the OFF state when the control pin is biased from VIN through the pull-up resistor. An internal PNP pass-transistor is used in order to achieve low dropout voltage (typically 200 mV at 50 mA load current).