Datasheet4U Logo Datasheet4U.com

THCV241A - SerDes transmitter

Description

THCV241A is designed to support 1080p60 2Mpixel uncompressed video data over 15m 100ohm differential STP or single-end 50ohm Coaxial cable with 4 in-line connectors between camera and processor by V-by-One® HS.

THCV241A supports a MIPI CSI-2.

Each CSI-2 data lane can transmit up to 1.2Gbps/lane.

Features

  • MIPI CSI-2 with 1,2 or 4-lane input.
  • MIPI D-PHY supports 80Mbps~1.2Gbps.
  • MIPI Virtual channel supported.
  • Video formats: RAW8/10/12/14/16/20, YUV422/420, RGB888/666/565, JPEG, Userdefined generic 8-bit.
  • V-by-One® HS 400Mbps~4Gbps x2lane.
  • V-by-One® HS standard version1.5.
  • Reference clock input CKI range 10~40MHz shareable with video source CMOS sensor.
  • Wide range IO voltage from 1.7V to 3.6V.
  • Additional spread spectrum to reduce EMI.
  • 2-wire serial.

📥 Download Datasheet

Datasheet Details

Part number THCV241A
Manufacturer THine Electronics
File Size 1.12 MB
Description SerDes transmitter
Datasheet download datasheet THCV241A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
THC1420 NPN Transistors Allegro Microsystems
THC1566 NPN Transistors Allegro Microsystems
THC1613 NPN Transistors Allegro Microsystems
THC1711 NPN Transistors Allegro Microsystems
THC2017 NPN Transistors Allegro Microsystems

Other Datasheets by THine Electronics

Part Number Description
THCV242 SerDes receiver
THCV213 LVDS SerDes transmitter and receiver
THCV214 LVDS SerDes transmitter and receiver
THCV215 HS High-speed Video Data Transmitter and Receiver
THCV216 HS High-speed Video Data Transmitter and Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
THCV241A_Rev.1.00_E THCV241A SerDes transmitter with bi-directional transceiver 1 General Description THCV241A is designed to support 1080p60 2Mpixel uncompressed video data over 15m 100ohm differential STP or single-end 50ohm Coaxial cable with 4 in-line connectors between camera and processor by V-by-One® HS. THCV241A supports a MIPI CSI-2. Each CSI-2 data lane can transmit up to 1.2Gbps/lane. Virtual channel is supported. One high-speed V-by-One® HS lane can transmit up to 1080p60fps. The maximum serial data rate is 4Gbps/lane. 2nd output lane supports HDR large amount of data or data copy-and-distribution experience. THCV241A is capable to control and monitor camera module from remote ECU via GPIO, UART or 1Mbps 2-wire serial interface.
Published: |