Datasheet4U Logo Datasheet4U.com

ICM-20602 Datasheet High Performance 6-Axis MEMS MotionTracking

Manufacturer: TDK Corporation

📥 Download Datasheet

General Description

The ICM-20602 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 3 mm x 3 mm x 0.75 mm (16-pin LGA) package.

• High performance specs o Gyroscope sensitivity error: ±1% o Gyroscope noise: ±4 mdps/√Hz o Accelerometer noise: 100 µg/√Hz • Includes 1 KB FIFO to reduce traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode • EIS FSYNC support ICM-20602 includes on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts.

The device

Overview

ICM-20602 High Performance 6-Axis MEMS MotionTracking™ Device.

Key Features

  • an operating voltage range down to 1.71V. Communication ports include I2C and high speed SPI at 10 MHz. Ordering Information PART TEMP RANGE ICM-20602†.
  • 40°C to +85°C †Denotes RoHS and Green-Compliant Package.

📁 Similar Datasheet

Brand Logo Part Number Description Manufacturer
InvenSense Logo ICM-20602 High Performance 6-Axis MEMS MotionTracking InvenSense

More Datasheets from TDK Corporation

Part Number Description
ICM-20648 6-Axis MEMS MotionTracking Device
ICM-20689 High Performance 6-Axis MEMS MotionTracking Device
ICM-20789 High Performance Integrated 6-Axis Inertial and Barometric Pressure Sensor
ICM-40627 High Performance 6-Axis MotionTracking IMU
ICM-42605 Premium Performance 6-Axis MotionTracking IMU
ICM-42670-P High Performance 6-Axis MotionTracking IMU
ICM-42688-P 6-Axis MEMS MotionTracking
ICM-42688-V High Precision 6-Axis MEMS MotionTracking Device
ICM-45605 High Performance 6-Axis MEMS MotionTracking Device
ICM-45686 High Performance Dual-Interface 6-Axis MEMS MotionTracking Device