Low-Profile High Current Power Inductor
CDEP15D90/T150
Electrical Characteristics: Standard Types
Part No.
CDEP15D90T150NP-4R7MC-125
CDEP15D90T150NP-6R2MC-125
CDEP15D90T150NP-100MC-125
CDEP15D90T150NP-125MC-125
CDEP15D90T150NP-150MC-125
CDEP15D90T150NP-220MC-125
Inductance
(μH) (±20％)
※1
4.70
6.20
10.0
12.5
15.0
22.0
D.C.R (mΩ)
(±20％)
3.50
4.90
7.90
8.90
10.6
14.5
Electrical Characteristics: High Power Types
Part No.
CDEP15D90T150NP-4R7MC-100
CDEP15D90T150NP-6R2MC-100
CDEP15D90T150NP-100MC-100
CDEP15D90T150NP-125MC-100
CDEP15D90T150NP-150MC-100
CDEP15D90T150NP-220MC-100
Inductance
(μH) (±20％)
※1
4.70
6.80
10.0
12.5
15.0
22.0
D.C.R (mΩ)
(±20％)
4.90
5.50
8.90
10.6
13.4
20.1
Saturation Current (A)
※2
at 20℃ at 150℃
Temperature Rise current
(A) ※3
17.0
14.8
12.0
10.2
9.60
7.70
11.8
10.4
8.40
7.60
6.70
5.30
16.5
14.8
12.5
12.2
8.50
7.50
Saturation Current (A)
※2
at 20℃ at 150℃
Temperature Rise current
(A) ※3
19.2
16.3
13.0
12.0
10.7
8.80
13.3
11.0
9.30
8.20
7.70
6.00
14.8
13.5
12.2
8.50
8.00
6.50
※ 1 Measuring frequency at 100kHz 0.1V
※ 2 Saturation current: This indicates the actual value of D.C. current when the inductance becomes 30% lower than its
nominal value.
※ 3 Temperature rise current: The actual value of D.C. current when the temperature of coil becomes △T=40°C
(Ta=20°C).
Please note that when using the product while applying current with audio-frequency (AF) signals may results in audible
noises due to magnetostriction. Also, in order to avoid an audible noise problem, operating with non-AF signals would be
recommended. The noise amplify depending on the coil mount area on the PCB.
Note： This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order.
Page 2 of 4
Ver.1.0 2016.03.14
www.sumida.com
