CXP87852 Datasheet | Sony Semiconductor Solutions

CXP87852/87860 CMOS 8-bit Single Chip Microputer Description The CXP87852/87860 is a CMOS 8-bit microputer which consists of A/D converter, serial interface, timer/counter, time base timer, high precision timing pattern generation circuit, PWM output, VISS/VASS circuit, 32k Hz timer/counter, remote control reception circuit, HSYNC counter, VSYNC separator and the measurement circuit which measures signals of capstan FG and drum FG/PG and other servo systems, as well as basic configurations like 8-bit CPU, ROM, RAM and I/O port. They are integrated into a single chip. Also the CXP87852/87860 provides sleep/stop functions which enable to lower power consumption. 100 pin QFP (PIastic) Structure Silicon gate CMOS IC Features - A wide instruction set (213 instructions) which covers various types of data - 16-bit operation/multiplication and division/Boolean bit operation instructions - Minimum instruction cycle 250ns at 16MHz operation (4.5V to 5.5V) 122µs at 32k Hz operation (2.7V to 5.5V) - Incorporated ROM capacity 52K bytes (CXP87852), 60K bytes (CXP87860) - Incorporated RAM capacity 2048 bytes - Peripheral functions - A/D converter 8 bits, 12 channels, successive approximation system (Conversion time of 20.0µs at 16MHz) - Serial Interface Incorporated buffer RAM (Auto transfer for 1 to 32 bytes), 1 channel Incorporated 8-bit and 8-stage FIFO (Auto transfer for 1 to 8 bytes), 1 channel Incorporated two-wire 8-bit and 8-stage FIFO (Auto transfer for 1 to 8 bytes), 1 channel - Timer 8-bit timer, 8-bit timer/counter, 19-bit time base timer, 32k Hz timer/counter - High precision timing pattern generator PPG: maximum of 19 pins, 32 stages programmable RTG: 5 pins, 2 channels - PWM/DA gate output PWM: 12 bits, 2 channels (Repetitive frequency of 62k Hz at 16MHz) DA gate pulse output: 13 bits, 4 channels - Servo input control Capstan FG, drum FG/PG, CTL input - VSYNC separator - FRC capture unit Incorporated 26-bit and 8-stage FIFO - PWM output 14 bits - VISS/VASS...