CXP83401
Overview
- A wide instruction set (213 instructions) which covers various types of data. - 16-bit operation/multiplication and division/Boolean bit operation instructions
- Minimum instruction cycle 400ns at10MHz operation 32kHz at 122µs operation
- Applicable EPROM LCC type 27C128, LCC type 27C256 (Maximum 16K bytes are available.)
- Incorporated RAM capacity 448 bytes (LCD display data area included)
- Peripheral functions - A/D converter 8 bits, 8 channels, successive approximation method (Conversion time of 32µs/10MHz) - Serial interface Incorporated 8-bit and 8-stage FIFO (Auto transfer for 1 to 8 bytes ), 1 circuit 2 channels - Timer 8-bit timer, 8-bit timer/counter, 19-bit time base timer, 32kHz timer/counter - LCD controller/driver Maximum 128 segments display possible (During 1/4 duty) 4 common outputs, 32 segment outputs Display method: Static, 1/2, 1/3 and 1/4 duty Bias method: 1/2 and 1/3 bias - Remote control reception circuit 8-bit pulse measurement counter with on-chip 6-stage FIFO - PWM output 14 bits 1 channel, 8 bits 1channel
- Interruption 12 factors, 12 vectors, multi-interruption possible
- Standby mode Sleep/stop
- Package 80-pin ceramic PQFP Note) Mask option depends on the type of the to the Products List for details. Structure Silicon gate CMOS IC Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. -1- E94X1
