CXP827P16
Overview
- Instruction set which supports a wide array of data types - 213 types of instructions which include 16-bit calculations, multiplication and division arithmetic, and Boolean bit operations.
- Minimum instruction cycle 400ns at 10MHz 122µs at 32kHz
- On-chip PROM 16 Kbytes
- On-chip RAM 448 bytes (Including fluorescent display data area)
- Peripheral functions - A/D converter 8-bit, 8-channel, successive approximation system (conversion rate 32µs/10MHz) - Serial interface On-chip 8-bit, 8-stage FIFO (1 to 8 bytes auto transfer), 2 channels for 1 circuit - Timers 8-bit timer 8-bit timer/counter 19-bit time-base timer 32kHz timer/counter - Fluorescent display panel controller/driver High voltage drive output port of 24 pins (40V) Maximum of 144 segments display available 1 to 16-digit dynamic display Dimmer function On-chip pull-down resistor Hardware key scan function (Maximum of 8 × 8 key matrix available) - Remote control receiver circuit On-chip 6-stage FIFO 8-bit pulse measurement counter - PWM output 8-bit, 1-channel
- Interrupts 13 factors, 13 vectors multi-interruption possible
- Standby mode SLEEP/STOP
- Package 64-pin plastic SDI
