Datasheet4U Logo Datasheet4U.com

CXG1194XR - SP4T Antenna Switch

General Description

The CXG1194XR is a high power SP4T antenna switch for GSM/UMTS applications.

The low insertion loss on transmit means increased talk time as the Tx power amplifier can be operated at a lower output level.

Key Features

  • ‹ Insertion loss (Tx) : 0.35dB (Typ. ) at 34dBm (GSM900) 0.45dB (Typ. ) at 32dBm (GSM1800) Package Small and Low height package size: 14-pin XQFN (2.5mm × 2.5mm × 0.35mm (Typ. )) Structure www. DataSheet4U. com GaAs JPHEMT MMIC This IC is ESD sensitive device. Special handling precautions are required. The actual ESD test data will be available later. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implicatio.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CXG1100TN High Power DPDT Switch Sony
CXG1115ER Dual-band Low Noise Amplifier/Mixer Sony
CXG1172UR JPHEMT High Power DPDT Switch Sony
CXG1173UR High Power SPDT Switch Sony
CXG1175UR High Power DPDT Switch SONY

Other Datasheets by Sony Semiconductor Solutions

Part Number Description
CXG1194UR SP4T Antenna Switch
CXG1190AEQ GSM/ UMT DUAL MODE SWITCH
CXG1192UR SP3T X 2 Antenna Switch
CXG1195XR High Power SP5T Antenna Switch MMIC
CXG1198AEQ SP8T GSM/UMTS Dual Mode Antenna Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SP4T Antenna Switch for GSM/UMTS CXG1194XR Description The CXG1194XR is a high power SP4T antenna switch for GSM/UMTS applications. The low insertion loss on transmit means increased talk time as the Tx power amplifier can be operated at a lower output level. On chip logic reduces component count and simplifies the PCB layout by allowing direct connection of the switch to digital baseband control lines with CMOS logic levels. This switch is SP4T, one antenna can be routed to either of the 2Tx or 2Rx ports. It requires 2 CMOS control lines. The Sony GaAs JPHEMT MMIC process is used for low insertion loss. (Applications: GSM dual-band handsets, GSM/UMTS dual-mode handsets) Features ‹ Insertion loss (Tx) : 0.35dB (Typ.) at 34dBm (GSM900) 0.45dB (Typ.