ICX618AQA Datasheet | Sony Semiconductor Solutions

Diagonal 4.5mm (Type 1/4) Progressive Scan CCD Image Sensor with Square Pixel for Color Cameras Description The ICX618AQA is a diagonal 4.5mm (Type 1/4) interline CCD solid-state image sensor with a square pixel array which supports VGA format. Progressive scan enables all pixel signals to be output separately within approximately 1/60 second. This chip Features an electronic shutter with variable charge-storage time which makes it possible to realize full-frame still images without a mechanical shutter. High resolution and high color reproducibility are achieved through the use of R, G, B primary color mosaic filters. The G sensitivity and near infrared sensitivity are improved drstically through the adoption of advanced EXview HAD CCD technology. This chip is suitable for applications such as security cameras and network cameras, etc. The ICX618AQA has different spectral characteristics from the current CCD. Features - High G sensitivity ( + 4.5d B pared with the ICX098BQ, + 2.5d B pared with the ICX614AQA) - High saturation signal ( + 4.0d B pared with the ICX098BQ, + 2.0d B pared with the ICX614AQA) - Low smear ( – 8.0d B pared with the ICX098BQ, ICX614AQA) - Progressive scan enables individual readout of the image signals from all pixels. - Square pixel - Supports VGA format - Horizontal drive frequency : Supports 24.54 MHz - No voltage adjustments (Reset gate and substrate bias need no adjustment.) - R, G, B primary color mosaic filters on chip - High resolution, high color reproducibility, high sensitivity, low dark current - Continuous variable-speed shutter - Excellent anti-blooming characteristics - Horizontal register : 3.3V drive - 14-pin high accuracy plastic package (dual-surface reference available) - EXview HAD CCD is a trademark of Sony Corporation. The EXview HAD CCD is a CCD that drastically improves light efficiency by including near infrared light region as a basic structure of HAD (Hole-Accumulation Diode) sensor. Sony...