ICX080AK Datasheet | Sony Semiconductor Solutions

Diagonal 6mm (Type 1/3) CCD Image Sensor for NTSC Color Video Cameras Description The ICX080AK is an interline CCD solid-state image sensor suitable for NTSC color video cameras. This chip conforms to DV standard SD mode, and has the optimal number of pixels for MPEG2 Main level. While achieving a horizontal resolution of 450 TV lines, the area has been expanded 33% in both vertical and horizontal directions, making the chip suitable for electronic vibration stabilizer and electronic panning/tilting. In addition, plete 16:9 wide aspect ratio images are provided with a high picture quality without requiring vertical interpolation. High sensitivity and low dark current are achieved through the adoption of Ye, Cy, Mg and G plementary color mosaic filters and HAD (Hole Accumulation Diode) sensors. This chip Features a field period readout system and an electronic shutter with variable chargestorage time. The package is a 16-pin DIP (Plastic), and both top and bottom surface reference can be assured at the same time. 16 pin DIP (Plastic) Pin 1 8 12 4 Pin 9 H 50 Features Optical black position - Supports electronic vibration stabilizer and electronic panning/tilting (Top View) (33%/one side) - Supports electronic zoom - Supports DV standard SD mode and MPEG2 Main level (13.5MHz) - Supports 16:9 wide aspect ratio (for both 18MHz and 5fsc) - Supply voltage: 12V - Horizontal register and reset gate: 2.7 to 3.6V drive - No voltage adjustment (Reset gate and substrate bias are not adjusted.) - High resolution, high sensitivity, low dark current and low smear - Excellent antiblooming characteristics - Continuous variable-speed shutter (1/60 to 1/10000s) - Supports short exit pupil distance (Remended range: - 20 to - 100mm) - Ye, Cy, Mg and G plementary color mosaic filters on chip - 16-pin high precision plastic package (both top and bottom surface reference possible) http://..net/ Device Structure - Interline CCD image sensor - Image...