• Part: CDX-4160
  • Description: FM/AM CD Player
  • Manufacturer: Sony Semiconductor Solutions
  • Size: 611.00 KB
CDX-4160 Datasheet (PDF) Download
Sony Semiconductor Solutions
CDX-4160

Key Features

  • Pressing the reset button will erase all the memorized program and memory functions.
  • When you connect the power supply cord to the unit or reset the unit, wait for about 10 seconds before you insert a disc. Do not insert a disc within these 10 seconds, otherwise, the unit will not be reset, and you will have to press the reset button again. EN Notes
  • Be sure not to attach the front panel upside down.
  • Do not press the front panel hard against the unit when attaching it. Press it lightly against the unit.
  • Do not press hard or put excessive pressure on the display window of the front panel.
  • Do not expose the front panel to direct sunlight, heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight where there may be a considerable rise in temperature. Caution alarm If you turn the ignition key switch to the OFF position without removing the front panel, the caution alarm will be activated and a beep tone will be heard for a few seconds (only for cars with an accessory position on the ignition key switch). If you connect an optional power amplifier and do not use the built-in amplifier, the beep tone will be disabled. Detaching the front panel You can detach the front panel of this unit to prevent the unit from being stolen. 1 2 Press (OFF). Press (RELEASE) to open up the front panel, and detach the panel by pulling it towards you. (OFF) (RELEASE) Notes
  • Be sure not to drop the panel when detaching it from the unit.
  • If you press (RELEASE) to detach the panel while the unit is still on, the unit will turn off automatically to prevent the speakers from being damaged.
  • When you carry the front panel with you, put it in the supplied front panel case. 4 Actual total number: Sony CDX-4160 (E,S,C,A) 3-859-005-11(1) Setting the clock The clock has a 12-hour digital indication. Example: Set the clock to 10:08 CD Player Listening to a CD Simply insert the CD. Playback starts automatically. Labelled side up 1 2 Press (OFF) or (DSPL) during operation. Press (DSPL) for two seconds. The hour digit flashes. 100 1 Set the hour digits. To go forward To go back 1000 2 Press (SEL) momentarily. If a CD is already inserted, press (SOURCE) repeatedly until “CD” appears. MIN SEC EN Getting Started/CD Player 215 Elapsed playing time Note To play back an 8 cm CD, use the optional Sony compact disc single adapter (CSA-8). The minute digits flash. 1000 3 Set the minute digits. To go forward To go back To Stop playback Eject the CD Press 6 or (OFF) 6 1008 3 Press (DSPL) momentarily. Changing the displayed items Each time you press (DSPL), the item changes as follows: z Elapsed playing time Time Z z Track number 1008 The clock is activated. Note If the car has no accessory position on the ignition key switch, the clock cannot be set unless the power is turn on. Set the clock after you have turned on the radio, or started CD playback. Locating a specific track - Automatic Music Sensor (AMS) During playback, press either side of (SEEK/AMS) momentarily. To locate succeeding tracks SEEK AMS To locate preceding tracks 5 Actual total number: Sony CDX-4160 (E,S,C,A) 3-859-005-11(1) Locating a specific point in a track - Manual Search During playback, press and hold either side of (SEEK/AMS) for two seconds. Release the button when you have found the desired point. To search forward SEEK AMS Radio Memorizing stations automatically - Automatic Memory Stations with the clearest reception are automatically searched and memorized on each band (FMI, FMII, FMIII and AM). Up to 6 stations on each band can be stored on the number buttons ((1) to (6)) in the order of band frequency. To search backward Note If “_ _ ” or “ _ _” appears in the display, you have reached the beginning or the end of the disc and you cannot go any further. Playing a CD in various modes EN Searching for the desired track - Intro Scan Press (1) during playback. “INTRO” appears in the display. The first 10 seconds of all the tracks are played. When you find the desired track, press again. The unit returns to the normal playback mode. 1 Press (SOURCE) repeatedly to select the tuner. Each time you press (MODE), the mode changes as follows: CD ˜ TUNER 2 Press (MODE) repeatedly to select the band. Each time you press (MODE), the mode changes as follows: ” FMI ” FMII ” FMIII ” AM Playing tracks repeatedly - Repeat Play Press (2) during playback. “REPEAT” appears in the display. When the currently played track is over, it will be played again from the beginning. To cancel this mode, press again. 3 Press (A.MEM) for two seconds. The unit will be starts scanning the selected band and memories the tuned stations on the number button (1) through (6) automatically. Playing tracks in random order - Shuffle Play Press (3) during playback. “SHUFFLE” appears in the display. To cancel this mode, press again. Notes
  • The unit does not store stations with weak signals. If only a few stations are received, some number buttons remain empty.