SN8P2705A
Description
Preliminary Version first issue 1. Add S8P2705A and relative information. 2. Modify migration SN8P1700 series to SN8P2700A series table. 3. Watchdog timer is still enabled in green mode If Watch_Dog code option is “Enable” 4. Change P0UR ~ P5UR, P1OC and P4CON registers to writer only mode. 5. Modify the oscillator diagram. 6. Modify the description of OSCM register. 7. Modify the wakeup time calculation formula. 8. Modify the description of system operation mode and table. 9. Modify SIO timing & description
. 10. Add ADC programming notice. 11. Modify the Standard electrical characteristic table include: Vi H, Vi L, Io H, Vast. 12. Change the cycle of following instruction to 1+N: BCLR, BTS1, B0BTS0 and B0BTS1. 13. In B0MOV M, I instruction, the value of I can’t be E6h or E7h. 14. In B0XCH A, M, instruction, the address of M can’t be 80h ~ FFh 15. Modify program checklist table. 16. Modify a lot description of SIO section and SIO data transfer timing. 17. Change operating...
